6 modelsPH Series inverter charger
Inverter chargers from 1.2kW to 3kW at 12V, and 2kW and 3kW at 24V, with up to 200A charging.
RV & mobile
NH Series pure sine wave inverter
12V and 24V inverters from 1.3kW to 2kW, with plug-in sockets or hardwired BYP models that pass shore power through.
Part of the LIBERGRID and MEZZO systems
The NH Series is the simple way to add 230V power where charging is already taken care of. In a LIBERGRID system it takes the place of the PH inverter charger. Choose a model with sockets on the front, or a hardwired BYP model that connects into your 230V circuits and switches between shore power and battery automatically.
Models
| NH1300L | 12V, 1.3kW, sockets |
|---|---|
| NH1500L | 12V, 1.5kW, sockets |
| NH2000L | 12V, 2kW, sockets |
| NH1500L-BYP | 12V, 1.5kW, hardwired with shore-power bypass |
| NH2000L-BYP | 12V, 2kW, hardwired with shore-power bypass |
| NH1500M | 24V, 1.5kW, sockets |
| NH2000M | 24V, 2kW, sockets |
Features
- Clean pure sine wave power for laptops, TVs, chargers and kitchen appliances.
- BYP models pass shore power straight through to your appliances when you’re plugged in.
- Very low standby and ECO-mode draw protects the battery when the inverter is idle.
- Built-in Bluetooth, CI-BUS compatible, and quiet stepless fan control.
- Switch on and off from the LIBER43 or VS28-LS monitor, an RNH remote switch, or with the ignition.
Compare models
| Model | Battery | Continuous (25°C) | Continuous (40°C) | Peak (2 s) | AC connection |
|---|---|---|---|---|---|
| NH1300L | 12V | 1.3kW | 1.17kW | 2.6kW | Sockets |
| NH1500L | 12V | 1.5kW | 1.35kW | 3.0kW | Sockets |
| NH2000L | 12V | 2.0kW | 1.8kW | 4.0kW | Sockets |
| NH1500L-BYP | 12V | 1.5kW | 1.35kW | 3.0kW | WAGO, with 16A bypass |
| NH2000L-BYP | 12V | 2.0kW | 1.8kW | 4.0kW | WAGO, with 16A bypass |
| NH1500M | 24V | 1.5kW | 1.35kW | 3.0kW | Sockets |
| NH2000M | 24V | 2.0kW | 1.8kW | 4.0kW | Sockets |
Specifications
| Battery voltage | 12V (10–16V) or 24V (21–32V) |
|---|---|
| AC output | 230/240V ±3%, 50/60Hz (selectable) |
| Waveform | Pure sine wave, under 3% distortion |
| Efficiency | Up to 93%, 90% at full load |
| ECO mode | 0.3A or less |
| Standby draw | Under 1.5W |
| Bypass (BYP models) | 16A, under 25ms transfer |
|---|---|
| Remote control | LIBER43, VS28-LS or RNH switch, or D+ |
| Interfaces | Bluetooth, CAN/RS485, LIN |
| Operating temperature | −30°C to 65°C (reduced output above 30°C) |
| Protection rating | IP20 |
| Dimensions | 382 × 236 × 85mm |
| Weight | 3.0kg |
| Standards | EN IEC 62477-1, EN 61000-6-4, EN 61000-6-2, ECE R10 |
Datasheets and manuals
Buy in New Zealand
More from LIBERGRID
6 models
3 modelsD11 digital power distribution unit
Switches, dims and protects the vehicle’s 12V circuits, with tank sensing and wireless switches, from one maintenance-free unit.
RV & mobile
6 modelsDDN Series DC-DC charger with MPPT
Charges the house battery from the alternator and solar at the same time, and can recharge a flat starter battery. 12V and 24V.
RV & mobile