6 modelsPH Series inverter charger
Inverter chargers from 1.2kW to 3kW at 12V, and 2kW and 3kW at 24V, with up to 200A charging.

A bi-directional charger that tops up the house battery from the alternator and can recharge a flat starter battery from the house battery system. 12V and 24V.
Part of the LIBERGRID system
The DN Series charges the house battery from the alternator while you drive, including from Euro 6 smart alternators. In a LIBERGRID system it pairs with an SN Series solar controller, as an alternative to the DDN.
| DN1220 | 12V, 20A |
|---|---|
| DN1230 | 12V, 30A |
| DN1245 | 12V, 45A |
| DN1260 | 12V, 60A |
| DN2430 | 24V, 30A |
| DN2460 | 24V, 60A |
| Model | House battery | Alternator | Charge current | Dimensions |
|---|---|---|---|---|
| DN1220 | 12V | 12V | 20A | 181 × 148 × 52mm |
| DN1230 | 12V | 12V | 30A | 181 × 148 × 52mm |
| DN1245 | 12V | 12V | 45A | 181 × 148 × 67mm |
| DN1260 | 12V | 12V | 60A | 181 × 148 × 67mm |
| DN2430 | 24V | 12V or 24V | 15A (12V) / 30A (24V) | 181 × 148 × 52mm |
| DN2460 | 24V | 12V or 24V | 30A (12V) / 60A (24V) | 181 × 148 × 67mm |
| Alternator | 12V (10.5–16V); DN24 models also 24V (21–32V); smart alternators supported |
|---|---|
| Efficiency | Up to 96% |
| Temperature compensation | −18mV/°C (12V, default) |
| Standby draw | Under 2mA |
| Communication | Bluetooth and CAN, plus a display port |
|---|---|
| Dry contact | 1 programmable relay, 30V 1A |
| Display | 4 LEDs |
| Cooling | Natural, no fan |
| Operating temperature | −40°C to 70°C (reduced output above 30°C) |
| Protection rating | IP40 |
| Weight | 1.5kg |
| Certifications | CE, E-Mark, SAA, FCC Part 15B |
6 modelsInverter chargers from 1.2kW to 3kW at 12V, and 2kW and 3kW at 24V, with up to 200A charging.
7 models12V and 24V inverters from 1.3kW to 2kW, with plug-in sockets or hardwired BYP models that pass shore power through.
3 modelsSwitches, dims and protects the vehicle’s 12V circuits, with tank sensing and wireless switches, from one maintenance-free unit.